The connected safety layer beyond the camera.
Smartwatches, wearable gas sensors, UWB proximity tags and voice broadcast — every device feeds one live safety picture.
AI on cameras. Wearables for the gaps.
SecureSafety is a software platform that runs on the IP cameras already installed at your site. The vast majority of industrial CCTV infrastructure deployed in the past ten years is compatible: ONVIF-compliant cameras, DVR systems with network video outputs, and cameras accessible via RTSP streams all connect to the platform without replacement or modification.
Camera coverage is the most complete form of safety monitoring because a camera watches its field of view continuously, without requiring a worker to carry or maintain a device. But cameras have a fundamental limitation: they only see what is in frame.
The wearable and IoT layer extends the platform's reach to these uncovered areas. Safety smartwatches provide man-down detection, no-motion alerts, panic alarm, and check-in functionality for lone workers who move beyond camera coverage.
Hardware specification is a Discovery phase output, not a product catalogue selection. The specific devices recommended for each deployment depend on the site's existing infrastructure, the hazards to be monitored and the environmental conditions.
Runs on the cameras you already own.
SecureSafety connects to your existing IP cameras over ONVIF and RTSP, processed on-premise. No rip-and-replace, and nothing new to buy to get started.
No cameras in the zones that matter most? We survey your site, then spec, supply and install the right cameras to close the gaps, as part of one deployment.
Even the cameras that won’t hold still.
Fixed cameras are easy: the scene never moves, so every safety zone stays calibrated. PTZ cameras move, which is where most analytics give up. We support them, and recommend the right mode for how each camera is used.
Locked view
Point the PTZ at one critical view and it runs full safety analytics, exactly like a fixed camera.
Preset patrol
We calibrate the safety zones for each guard-tour preset, then switch the calibration automatically as the camera reports it has landed on position over ONVIF, not on a blind timer.
Live tracking
For supported cameras and scenes, the analytics follow the camera as it moves, using its position feedback together with the live image.
One honest rule. A PTZ only watches where it is pointed. For the zones that must never go unwatched, we pair a fixed camera for continuous coverage with the PTZ for detail and verification.
Detected on camera. Felt on the wrist.
The moment the AI spots a hazard, the right workers feel it. Pick a scenario to see the alert land on the watch.
From the wrist to the control room.
Each piece closes a gap that cameras alone leave open, from lone workers and confined spaces to one live picture in the control room.
Safety smartwatch
The worker's own safety device. It carries every alert the AI raises, tracks location and runs lone-worker check-ins, and raises an SOS with one press, even out of camera range. Rugged enough for the yard and the drill floor.
- One-touch SOS
- Automatic fall & man-down
- Lone-worker check-ins
- Two-way voice & messaging
- Live location & geofencing
- Rugged, all-shift battery
LLM voice broadcast
Detections become spoken announcements across the site. An on-site language model turns a red-zone breach or evacuation into a clear, hands-free warning. It says “Clear bay 4, vehicle approaching” the moment it happens.
- Site-wide PA
- Spoken red-zone & fire alerts
- Evacuation announcements
- Multilingual
Location & mustering
Phones, smart badges and BLE beacons give real-time location and proximity where cameras can’t see, plus an automatic, accurate headcount at muster points the moment an evacuation is called.
- Real-time RTLS
- Automatic roll-call / POB
- Restricted-area geofencing
- Lone-worker tracking
Collision avoidance
UWB/BLE tags warn workers and drivers before a struck-by, the number-one hazard in yards, ports and airside. They can auto-slow forklifts, cranes and vehicles when a pedestrian gets too close. Camera red zones, backed by hardware.
- Man-vehicle alerts
- Auto-slow / stop
- Centimetre ranging
- Blind-spot cover
Gas & environmental
The one hazard class a camera fundamentally cannot see. Wearable multi-gas monitors alarm on toxic or explosive atmospheres such as H₂S, CO, O₂ and LEL. Fixed IoT nodes feed the platform conditions vision can’t measure.
- H₂S / CO / O₂ / LEL
- Confined-space ready
- Heat-stress signals
- Site IoT nodes
Connected control room
Every camera detection, worker, tag and alarm plotted on one live 3D model of your site. A single pane of glass from the drill floor to the perimeter, so the control room sees the whole operation at a glance.
- Live 3D digital twin
- Unified alerts
- Multi-site view
- Replay & audit
+ integrates furtherConnected hard hats, body-worn cameras, fatigue sensors and e-ink badges, all into the same platform.Scope your hardware
Camera to wearable. One safety picture.
Book a demo to see how the hardware layer connects with AI camera detection for complete site coverage.